Flowshield Eco
Vendor: Virtus Resins
Flowshield Eco offers protection for porous exterior walls, paving, roof tiles and exterior wood. Flowshield Eco impregnates surfaces for superior water repellency and resistance to dirt, stains and grime using the latest Fluorocarbon Technology. It enhances the durability of the building substrate, fully allowing the surface to ‘breathe’, whilst providing superior water repellence, stain repellence and maintaining longer lasting, cleaner surface.
Suitable Surfaces
Designed to provide an invisible waterproof protection to porous exterior walls (brickwork, stonework, cement rendering, clay roof tiles, exterior wood treated with preservative etc).
Advantages
- Superior water repellence
- Excellent stain
- UV, chemical and abrasion resistant
- Resistant to dirt, atmospheric pollution, weathering and delays aging
- Prevents moss and algae growth
- Permeable to water vapour (breathable)
- Maintains freeze thaw characteristics
- Reduces efflorescence
- Natural finish obtained
- Solvent free
- One coat application - reduced labour cost
- Up to 10 years product performance
Typical Installations
- Exterior
- Anti-Graffiti
- Weather-shield (waterproof and UV-resistance)
Pack Size
5L and 15L plastic containers.
Colour
Clear once cured.
Surface Preparation
It is very important that the surface is dry and free from mould growth, dirt and grease. Algae or fungal deposits should first be removed by power washing the surface and then coat with Virtu’s Fungicidal Wash Solution. Allow to dry thoroughly before applying Flowshield Eco.
Usage
Outdoor (exterior)
Resistant To
Water, UV-rays and wide range of chemicals.
Coverage
Consult TDS for specific substrates.
Coats Required
Apply one flood coat application to saturation point. No coating should be carried out when the substrate temperature is below 5°C or above 35°C. NOTE: On very highly porous substrates a 2 coat wet on wet application may be required to obtain maximum performance.
Drying Time
Depending upon the outside ambient curing temperature: 1-2 hours touch dry and full cure achieved in 7 days.
Technical Datasheets/h4>
Flowshield Eco Technical Data Sheet
Related Product
Best Sellers
