A garage floor paint favourite.
Flowcoat is a two pack, water based, epoxy resin floor and wall paint with a gloss finish.
Suitable Surfaces: Concrete, Grano, metal and wood
- Heavy residential to light industrial use Garages
- Factories and warehousing
- Food preparation and storage areas
- Floors and walls
- Floors and walls in processing and manufacturing plants
- Can withstand heavy domestic and light industrial conditions
- Easy to apply
- Gives a hygienic, seamless floor finish which is easy to clean
- Low odour
- Solvent free
- Will not support bacterial growth
Usage: Indoor (some colour change would occur if used outdoors)
Resistant to: A range of acids and other chemicals.
Pack Contents: 10 x 10kg units. You will use 5 x 10kg units per coat.
Coverage: Approx 800 sqm based on one coat or 400 sqm based on two coats
Coats Required: Two coats are usually required
Drying Time: Normally 16 hours at 20oc for foot traffic
Cleaning: Hot water mopping with detergents.
Thickness: Up to 0.5 mm
Primer: Flowcoat does not normally require a primer. On very weak or porous concrete, it is advisable to prime with Flowprime SF.