Flexicoat UVR is a flexible high build polyurethane floor coating with excellent abrasion and impact resistance and provides a medium duty coating for floors.
Two coats of Flexicoat UVR provide a build equivalent to almost 10 coats of conventional solvent containing coatings.
Flexicoat UVR is ideal for areas requiring good wear resistance combined with economical cost such as: storage areas, plant rooms, warehousing, toilets etc. Also suitable for lining chemical bunds due to its chemical-resistant properties. It can be applied as a one coat application at a coverage rate of 0.365g per m2 or over (the aesthetics are dependant on application technique and substrate quality).
Flexicoat UVR is a FeRFA Type 3, high-build medium-duty flooring system able to withstand regular foot traffic and frequent fork lift truck traffic.
Flexicoat UVR is suitable for the protection of concrete floors subject to medium duty traffic (regular foot traffic, frequent fork lift truck traffic, occasional hard plastic-wheeled trolleys). As it is flexible, it is ideal for use on floors which experience some minor movement such as floors holding vibrating machinery or mezzanines.
Typical uses include areas requiring good wear resistance combined with economical cost such as: storage areas, plant rooms, warehousing, toilets etc. Also suitable for lining chemical bunds due to its chemical-resistant properties.
A medium gloss surface with a slightly stippled finish.
Flexicoat UVR can be applied to concrete, polymer modified cementitious screeds, steel, timber and asphalt.
0.25 - 1 mm depending on application rate and number of coats.
A 5 kg will cover 8 sqm (2 coats).
Inadequate preparation will lead to loss of adhesion and failure. In coatings, there is a tendency for the finish to mirror imperfections in the substrate. For concrete substrates, grinding or light vacuum contained shot-blasting is therefore preferred over planing for these systems.
Typical Properties, 7 Days at 23ºC
BS 8204-6 type 3
Mixed density (approximately) 1.6 g/cm3
Shore D hardness 40
Tensile strength (ASTM D412 die C) > 6 N/mm3
Elongation (ASTM D412 die C) > 30 %
Tear strength (ASTM D624) > 8 N/mm
Flexicoat UVR Data Sheet & Colour Chart