The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Flowdur MD

(Inc. VAT)
(Ex. VAT)
(No reviews yet) Write a Review
29.64 KGS
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Flowdur MD is a 4 - 6 mm heavy duty flow applied polyurethane floor topping for use on concrete and polymer modified cementitious screeds. Flowdur MD is designed with the highest order of durability, impact, abrasion and chemical resistance. Its easy to clean, smooth, matt finish makes the product ideal for environments such as the food, beverage, engineering and chemical industries. 
Flowdur MD may be applied between 15 - 25 °C. The substrate and uncured floor must be kept at least 3°C to reduce the risk of condensation or blooming on the surface, from before priming to at least 48 hours after application.  


Seamless, smooth matt finish.  

Typical Uses

Warehouses, laboratories, food preparation, areas in need of chemical resistant flooring. 

Features & Benefits

  • Flow applied - rapid installation 
  • High chemical resistance 
  • Non-tainting and non-dusting 
  • Seamless
  • High abrasion resistance 
  • Easy to clean 


4 - 6 mm depending on application rate and number of coats.  

Typical Properties, 28 days at 20 ºC

BS 8204-6 Type 7
Adhesive strength to concrete (BS EN 1504-2): Shore D Hardness > 1.5 Mpa 75
Slip resistance (Pendulum Test Value BS 7976-2): ≥ 60 dry 
The typical physical properties given above are derived from testing in a controlled laboratory environment. Results derived from testing field-applied samples may vary dependent upon site conditions. 

Pack Size

29.64 kg units comprising of: Polyurethane Resin, Hardener and Aggregate components.  

Pot Life

29.64 kg units comprising of: Polyurethane Resin, Hardener and Aggregate components. 
Cure Schedule @ 20 °C*
Cure time to light pedestrian traffic ~ 12 hours
Cure time to light wheeled traffic ~ 24 hours
Cure time to heavy duty traffic ~ 48 hours
Full chemical resistance ~ 7 days  
* These cure times are approximate and given as a guide only. These times can vary due to prevailing site conditions. 
Please see Technical Data Sheet for further information. 

Technical Data

Flowdur MD Technical Data Sheet & Colour Chart