The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Flowdur RT - Rake and Trowel Polyurethane Screed

(Inc. VAT)
(Ex. VAT)
(No reviews yet) Write a Review
30.30 KGS
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Pre-mix the coloured resin component before use. Add the hardener component to the coloured resin component and mix using a low speed electric mixer (300 - 400 rpm) for 1 - 2 minutes until homogeneous.
Further Mixing:
Decant the mixture into a rotary drum mixer and add the aggregate component in stages, mixing for a minimum of 3 minutes until a uniform coloured, lump-free mix is obtained.
Apply to primed areas to the required thickness using a steel float. Ensure that anchor grooves are fully wetted out with material. Protect the installed floor from damp, condensation and water for at least 4 days.
Coverage Rates:
12 kg/m2 at 6 mm or 18 kg/m2 at 9 mm
Curing Schedule at 20ºC:
Working life of pack is 15 minutes. Cure time to light pedestrian traffic is 12 hours. Cure time to light wheeled traffic is 24 hours. Cure time to heavy duty traffic is 48 hours. Full chemical resistance is 7 days.

Flowdur RT is a resin-rich heavy duty, trowel applied polyurethane floor screed for use on concrete and polymer modified cementitious screeds. Flowdur RT is designed with the highest order of durability, impact, abrasion and chemical resistance. Its lightly textured finish makes the product ideal for both wet and dry processing environments such as the food, beverage and chemical industries.


Seamless, matt surface with a light slip resistant texture. Flowdur RT contains a white aggregate which imparts a slip resistant profile to the finished floor. When first installed, the floor has a uniform coloured surface. However, with general use, the white aggregate will begin to show through giving a decorative, mottled appearance.

Features & Benefits

  • Resin rich - easier and quicker to apply than stiffer screeds.
  • Stable to steam cleaning and hot water exposure at a thickness of 9 mm.
  • Very high chemical resistance.
  • Non-tainting.
  • Seamless
  • High abrasion resistance.
  • Slip resistant.


6 – 9 mm


Flowdur RT is water based and non-tainting (Campden & Chorleywood Food Research Association test method TES-S-002).

Technical Downloads