The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Flowdur SL - Self-Smoothing Polyurethane Floor Topping

(Inc. VAT)
(Ex. VAT)
(No reviews yet) Write a Review
27.30 KGS
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Thoroughly drain the contents of the brown hardener component into the liquid colour component and mix for a minimum of one minute or to provide a homogeneous mix. The resultant mixture should then be loaded into a rotary drum mixer and the aggre
Apply to pre-primed areas, levelling to the required thickness with a steel trowel aided by a Virtus spiked roller. Spiked rollering should be effected within three minutes of application in order to avoid interfering with the flow and film gel ti
Coverage Rates:
At 2mm: 3.63kg/m2. At 2.5mm: 4.54kg/m2.
Curing Schedule at 20ºC:
Usable Life of full unit/mix is 15 mins. Initial film gel time (joining up) is 20 mins. Cure time to light pedestrian traffic is 5-7 hours. Cure time to light wheeled traffic is 12-16 hours. Cure time to heavy duty traffic is 24 hours. Full cure is


Flowdur SL is a medium duty flow applied polyurethane floor topping for use on concrete and polymer modified cementitious screeds. Flowdur SL is designed with the highest order of durability, impact, abrasion and chemical resistance. Its easy to clean, smooth, matt finish makes the product ideal for environments such as the food, beverage, engineering and chemical industries.


Seamless, smooth, matt finish.

Features & Benefits

  • Flow applied - rapid installation
  • High chemical resistance
  • Non-tainting and non-dusting
  • Seamless
  • High abrasion resistance
  • Easy to clean


2 – 3 mm


3.6 kg/m2 at 2 mm or 5.4 kg/m2 at 3 mm

Drying Times

Cure time to light pedestrian traffic is 12 hours, light wheeled traffic is 24 hours and heavy duty traffic is 48 hours.

Technical Data

Flowdur SL Technical Data Sheet