Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

Customers also viewed

Flowshield Eco

01978 790 744
Quantity:
Weight:
5.00 KGS

Product Description

Flowshield Eco offers protection for porous exterior walls, paving, roof tiles and exterior wood. Flowshield Eco impregnates surfaces for superior water repellency and resistance to dirt, stains and grime using the latest Fluorocarbon Technology. It enhances the durability of the building substrate, fully allowing the surface to ‘breathe’, whilst providing superior water repellence, stain repellence and maintaining longer lasting, cleaner surface.

Suitable Surfaces

Designed to provide an invisible waterproof protection to porous exterior walls (brickwork, stonework, cement rendering, clay roof tiles, exterior wood treated with preservative etc).

Advantages

  • Superior water repellence
  • Excellent stain
  • UV, chemical and abrasion resistant
  • Resistant to dirt, atmospheric pollution, weathering and delays aging
  • Prevents moss and algae growth
  • Permeable to water vapour (breathable)
  • Maintains freeze thaw characteristics
  • Reduces efflorescence
  • Natural finish obtained
  • Solvent free
  • One coat application - reduced labour cost
  • Up to 10 years product performance

Typical Installations

  • Exterior
  • Anti-Graffiti 
  • Weather-shield (waterproof and UV-resistance)

Pack Size

5L and 15L plastic containers.

Colour

Clear once cured.

Surface Preparation

It is very important that the surface is dry and free from mould growth, dirt and grease. Algae or fungal deposits should first be removed by power washing the surface and then coat with Virtu’s Fungicidal Wash Solution. Allow to dry thoroughly before applying Flowshield Eco.

Usage: Outdoor (exterior)

Resistant to: Water, UV-rays and wide range of chemicals.

Coverage: Consult TDS for specific substrates.

Coats Required: Apply one flood coat application to saturation point. No coating should be carried out when the substrate temperature is below 5°C or above 35°C. NOTE: On very highly porous substrates a 2 coat wet on wet application may be required to obtain maximum performance.

Drying Time: Depending upon the outside ambient curing temperature: 1-2 hours touch dry and full cure achieved in 7 days.

Technical Downloads

Flowshield Eco Technical Data Sheet

pdf-icon1.png

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!