The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Reecote EC014 - Solvent Based Epoxy Coating

£94.80
(Inc. VAT)
£79.00
(Ex. VAT)
(No reviews yet) Write a Review
Weight:
5.90 KGS
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Mixing:
The entire contents of the curing agent, component B, should be added to the entire contents of the resin pack, component A, and stirred thoroughly until uniform colour is achieved (2-3 minutes).
Application:
Apply the mixed material to the suitable prepared floor by brush or roller, ensure complete coverage of the floor area. Apply the second coat within 24 hours of the first.
Coverage:
Coverage 168g/m2. Single application Coverage is given as a guide only as the exact coverage will vary from floor to floor.
Curing Schedule:
At 20 degrees, pot life is 30 minutes. Waiting time between coats is 24 hours. Final drying times for foot traffic is 1 day, lightly serviceable is 2 days and fully serviceable is 7 days.

Reecote EC014 is based on a blend of epoxy resins, curing agents, mineral fillers and solvent. Reecote EC014 is supplied in pre-weighed containers to ensure correct on-site mixing. It is available in a wide range of colours. It provides an attractive,dust free, chemical and abrasion resistant floor coating.

Reecote EC014 is suitable for use where a dust free, hygienic, easy clean floor coating is required. The cured material provides resistance to a wide range of chemicals and industrial traffic. Suitable locations include warehouses, light industrial factories, garages, workshops etc.

FeRFA Type

Type 2

Advantages

  • Good Chemical Resistance
  • Wide Colour Range
  • Good Abrasion Resistance
  • Fast Curing
  • Dust Free Surface

Coverage

168g/m2 - Single application

Approx. 35m2/coat.

Two coats recommended. 

Curing Schedule

Overcoating period is 24 hours, final drying time to foot traffic is 1 day, lighty serviceable is 2 days and fully serviceable is 7 days.

Priming

A primer not required with this product. A third coat may be required with some colours to achieve full opacity.

Technical Downloads

Reecote EC014 Technical Data Sheet & Colour Chart 

pdf-icon1.png