The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Reecote EC019 Plus - Water Based Epoxy Coating

£78.00
(Inc. VAT)
£65.00
(Ex. VAT)
(No reviews yet) Write a Review
Weight:
4.65 KGS
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Mixing:
Mixing is carried out in the resin container component A, by using a low speed electric drill with a paint stirrer attachment (300 – 400 RPM). Stir or shake well the contents of the hardener component B and add to resin component A and mix for approx
Application:
Apply in a well ventilated area using a brush or roller (Not Foam). Maintain application and subsequent cure temperatures between 6°C and 25°C (Minimum Slab Temperatures 5°C)
Coverage Rates:
Coverage 25-35m²/5.16kg Unit. Material usage is dependant upon temperature, surface profile and porosity state. Coverage rate is only for guidance.
Curing Schedule:
Working time at 20 degrees is 2 hours. Waiting time between coats is minimum 12 hours and maximum 35 hours. Final drying times for foot traffic is 12-24 hours, serviceable 3 days - 5 days and fully cured is 7 days - 12 days.

Reecote EC019 Plus is a third generation two part water based Epoxy coating available in a wide range of colours. May be applied to green concrete and damp surfaces. Its microporous properties permit the passage of entrapped water vapour whilst still providing a barrier against liquids.

Advantages

  • Cost Effective, Easy to Clean
  • Easy to Apply, Low Odour
  • Chemically Resistant, Abrasion Resistant
  • Solvent free, Zero VOC
  • Attractive Range of Colours
  • Skydrol Resistant

Suitable Substrates

  • Concrete
  • Performance Screeds
  • Stone
  • Polymer screeds
  • Plaster
  • Terrazzo
  • Bricks
  • Timber including MDF

Typical Areas of Use

  • Light to Heavy Industrial areas
  • Storage Areas
  • Food Processing Areas
  • Aircraft Hangers
  • Water Treatment Plants
  • Garages Laundry Rooms
  • Supermarket Storage Areas

Coverage

25-35m²/5.16kg Unit

Curing Schedule

Overcoating period is between 12 and 35 hours. Final drying time for foot traffic is 12-24 hours, serviceable is 3-5 days and fully cured is 7-12 days.

Priming

No primer is required with this product. A third coat may be required with some colours to achieve full opacity.

Technical Downloads

Reecote EC019 Plus Technical Data Sheet

pdf-icon1.png