The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Reeflor EL002 S/F - Self Smoothing Solvent Free Epoxy Flooring

£146.40
(Inc. VAT)
£122.00
(Ex. VAT)
(No reviews yet) Write a Review
Weight:
24.50 KGS
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Priming:
All floors must be thoroughly sealed with Reeprime EP550 or Reeprime RBS80 prior to the application of Reeflor EL002-SF. It is always preferable that the sealing is carried out in one application by depositing sufficient primer.
Mixing:
The entire contents component B should be added to the entire contents of component A, and should be mixed together using a low speed electric stirrer (300-400 RPM) for a minimum of 3 minutes until a uniform mix has been achieved.
Further Mixing:
Transfer to suitable sized mixing bucket scraping well the sides of the container. Gradually add aggregate component C while mixing. Continue mixing for 2 minutes or until a uniform mix has been achieved.
Application:
Pour the mixed material onto the pre-sealed substrate and spread to the required level by steel trowel. Roll immediately in two directions with a spiked roller.
Curing Schedule:
At 20 degrees: Pot life is 20 minutes. Intercoat period is is 24 hours. Final drying time for foot traffic is 1 day, light serviceable is 2 days and fully serviceable is 7 days.

Reeflor EL002-SF is suitable for use where a hard wearing; dust free; hygienic, easy clean floor topping is required. Ideal situations include industrial or commercial floors, laboratories, car showrooms, gangways etc.

Reeflor EL002-SF is a 1.5- 4.5mm floor topping with advantages to both contractors and clients. All resins, curing agents and aggregates are supplied pre-weighed ready for use on site.

FeRFA Type

Type 5

Advantages

  • Self Smoothing
  • Hygienic
  • Good Chemical
  • Resistance
  • Solvent Free
  • Wide Colour Range
  • Hard Wearing

Coverage

1.75 Kg/m2 minimum.

Curing Schedule

Drying times for light foot traffic is 1 day, lightly serviceable is 2 days and fully serviceable is 7 days.

Priming

All floors must be thoroughly sealed with Reeprime EP550 prior to the application of Reeflor EL002-SF.

Technical Data

Reeflor EL002 SF Technical Data Sheet

pdf-icon1.png