The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Reeflor EL300 AS - Static Dissipative Floor

£276.00
(Inc. VAT)
£230.00
(Ex. VAT)
(No reviews yet) Write a Review
Weight:
37.50 KGS
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Appearance:
Small pimples may be visible on the surface. These are not air bubbles. They are carbon fibres which are there to carry the discharge to the base of the system and will totally disappear once the floor has been used for a month or so.
Coverage Guide:
3.86m2 @4mm / 37.5kg (maximum). Coverage is given as a guide only as the exact coverage will vary from floor to floor.
Curing Schedule:
At 20 degrees, pot life is 30 minutes, intercoat period is 24 hours. Final drying times for foot traffic is 1 day, lightly serviceable is 2 days and full cure is 7 days.

Reeflor EL300 AS is based on a blend of epoxy resins, curing agents and selected fine aggregates. All components are pre-batched and supplied pre-weighed to ensure consistent batching of materials.

Reeflor EL300 AS is suitable for use in areas where a build up of static electricity may lead to damage of sensitive electrical equipment or explosion of dust or solvents. Reeflor EL300 AS provides a seamless, hygienic, hard wearing finish with excellent resistance to heavy traffic.

Advantages

  • Self smoothing
  • Easy to clean
  • Wide colour range
  • Good chemical resistance
  • Hard wearing

Coverage

3.86m2 @4mm per unit.

Primimg

Priming will need to be carried out using Reeprime CPS900 prior to application of Reeflor EL300 AS.

Curing Schedule

Drying times for foot traffic is 1 day, lightly serviceable is 2 days and fully serviceable is 7 days.

Technical Data

Reeflor EL300 AS Technical Data Sheet & Colour Chart

pdf-icon1.png